The FM28V100-TG you mentioned is likely a specific model from Fujitsu or another semiconductor manufacturer. Based on the number and type of characters in the model name, the "FM" prefix typically refers to non-volatile Memory (Flash Memory) or similar devices, and "28" often corresponds to the family or specific functionality, such as memory or logic devices.
Key Information You Requested:
Manufacturer: Likely Fujitsu or related manufacturer. Package: The "TG" suffix usually indicates the type of package, which could be a specific surface-mount type, like TQFP or similar. Pin Function Specifications: You are asking for the pinout, which would include a complete list of pin functions, a breakdown of how each pin is used, and any special instructions for usage.I cannot fetch or display datasheets or technical documentation directly. However, I can guide you on how to interpret and organize such information in detail.
Pin Function Table
Here’s an example of how to structure the pin functions of a component like the FM28V100-TG in a table format. Since I can't directly reference the specific datasheet, the example below is illustrative and based on the common structure of Flash Memory chips.
Pin Number Pin Name Pin Function Description 1 Vcc Power Supply Connect to the positive supply voltage (typically 3.3V or 5V). 2 GND Ground Connect to the ground or negative supply. 3 WE Write Enable Controls write operations to memory. Must be low to enable writing. 4 OE Output Enable Activates output drivers when low, allowing data to be read. 5 CE Chip Enable Must be low to activate the chip. 6 A0-A19 Address Bus (Address Pins) Inputs for address signals for accessing memory. 7 DQ0-DQ7 Data Bus (Data Pins) Bidirectional data lines for transferring memory data. 8 RESET Reset Pin Resets the chip to its initial state. Typically active-low. 9 WP Write Protect Prevents writing to memory if high. 10 R/B Ready/Busy Indicates the device’s status: high when idle, low when busy. 11 Vcc Power Supply Another power input for redundancy.(Continue listing the pins similarly…)
Detailed FAQ for FM28V100-TG
Q1: What is the function of the WE (Write Enable) pin?
A1: The WE pin controls memory write operations. It must be low for data to be written to the device.Q2: How should the RESET pin be used in the FM28V100-TG?
A2: The RESET pin is used to reset the memory device. It is typically active-low, meaning it should be pulled low to reset the chip.Q3: Can the FM28V100-TG be used without the WP (Write Protect) pin?
A3: No, the WP pin should be configured according to your needs to prevent accidental writes.Q4: How do I connect the GND and Vcc pins?
A4: Connect GND to the system ground and Vcc to the positive power supply, ensuring the voltage is within the specified range.Q5: What are the A0-A19 pins used for?
A5: The A0-A19 pins are address inputs. These pins are used to specify the memory location to be accessed.Q6: Can I leave the DQ pins unconnected?
A6: No, the DQ pins (data bus) must be connected for proper data read and write operations.Q7: How do I determine when the device is ready or busy?
A7: The R/B pin indicates the device’s status. It will be low when the device is busy and high when it is ready.(Continue the FAQ section in this way…)
Conclusion
This is a template format for organizing detailed specifications, pin functions, and common FAQs related to your FM28V100-TG device. You will need the actual datasheet from the manufacturer (likely Fujitsu or another semiconductor company) to fill in the exact details and confirm the complete pinout and specifications for your model.
For full access to such information, I recommend downloading the datasheet from the manufacturer's website or other trusted sources.